Function rc_mav_send_manual_control#

Function Documentation#

int rc_mav_send_manual_control(int16_t x, int16_t y, int16_t z, int16_t r, uint16_t buttons, uint8_t target)#

Pack and send message of type MAVLINK_MSG_ID_MANUAL_CONTROL.

Parameters:

x – [in] X-axis, normalized to the range [-1000,1000]. A value of INT16_MAX indicates that this axis is invalid. Generally corresponds to forward(1000)-backward(-1000) movement on a joystick and the pitch of a vehicle.
y – [in] Y-axis, normalized to the range [-1000,1000]. A value of INT16_MAX indicates that this axis is invalid. Generally corresponds to left(-1000)-right(1000) movement on a joystick and the roll of a vehicle.
z – [in] Z-axis, normalized to the range [-1000,1000]. A value of INT16_MAX indicates that this axis is invalid. Generally corresponds to a separate slider movement with maximum being 1000 and minimum being -1000 on a joystick and the thrust of a vehicle.
r – [in] R-axis, normalized to the range [-1000,1000]. A value of INT16_MAX indicates that this axis is invalid. Generally corresponds to a twisting of the joystick, with counter-clockwise being 1000 and clockwise being -1000, and the yaw of a vehicle.
buttons – [in] A bitfield corresponding to the joystick buttons’ current state, 1 for pressed, 0 for released. The lowest bit corresponds to Button 1.
target – [in] The system to be controlled.

Returns:

0 on success, -1 on failure