Features
BB-Config v1.x
PRU Enable/Disable
Enable/Disable PRU

GPIO
Turn On/Off gpio
GPIO Setting

EMMC and MicroSD Stats
Storage stats & grow partition

LEDs
Config board build in LEDs

Password
Change users password

SSH
Enable/Disable SSH

WiFi
Connect to Wi-Fi

Internet Sharing and Client Config

Note: You’ll have to configure your host Following is an example script:
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables --table nat --append POSTROUTING --out-interface wlp4s0 -j MASQUERADE
iptables --append FORWARD --in-interface wlp4s0 -j ACCEPT
About

BB-Config v2.x
ADC (Graph)
Plot graph for Analogue pin


DAC (PWM)
Generate PWM waveform

uEnv
Enable/Disable boot configuration

services
Enable/Disable services startup at boot

PINMUX
Display PIN I/O detail
Config PINMUX
Hardware Display

Pin Table References

Pin Config

Overlay (dts)
Enable/Disable Device Tree Overlay in Boot option
Select dtbo file and automate update in uEnv.txt

WiFi (D-Bus)
Connect to WiFi with wpa_supplicant
Support for Debian 11
