Microchip FPGA Tools Installation Guide#
Instructions for installing the Microchip FPGA tools on a Ubuntu 20.04 desktop.
Important
We will be providing instances of Libero that you can run from git.beagleboard.org’s gitlab-runners such that you do not need to install the tools on your local machine.
Todo
Make sure people know about the alternative and we provide links to details on that before we send them down this process.
Install Libero 2023.2#
Download installer from the Microchip’s fpga and soc design tools section.
Install Libero
unzip Libero_SoC_v2023.2_lin.zip
cd Libero_SoC_v2023.2_lin/
./launch_installer.sh
Important
Do not use the default location suggested by the Libero installer. Instead of /usr/local/Microchip/Libero_SoC_v2023.2 install into ~/Microchip/Libero_SoC_v2023.2
Run the post installation script which will install missing packages:
sudo /home/<USER-NAME>/Microchip/Libero_SoC_v2023.2/Logs/req_to_install.sh
No need to run the FlashPro hardware installation scripts. This will be taken care of as part of the SoftConsole installation.
Install SoftConsole 2022.2#
Download intaller from Microchip website.
sudo chmod +x Microchip-SoftConsole-v2022.2-RISC-V-747-linux-x64-installer.run
./Microchip-SoftConsole-v2022.2-RISC-V-747-linux-x64-installer.run
Accept the license, Click Forward, Finish.
Perform the post installation steps as described in the html file opened when you click Finish.
Important
Please pay special attention to the “Enabling non-root user to access FlashPro” section of the post-installation instructions. This will actually allow you to program the board using Libero.
Install the Libero licensing daemon#
Download the 64 bit Licensing Daemons from the Microchip’s daemons section
Copy the downloaded file to the Microchip directory within your home directory and untar it.
cd ~/Microchip
tar -xvf Linux_Licensing_Daemon_11.16.1_64-bit.tar.gz
Install the Linux Standard Base:
sudo apt-get update
sudo apt-get -y install lsb
Request a Libero Silver license#
Choose “Libero Silver 1Yr Floating License for Windows/Linux Server” from the list.
Enter your MAC address and click register.
Note
A MAC address looks something like 12:34:56::78:ab:cd when you use the “ip address” command to find out its value on your Linux machine. However, you need to enter it as 123456abcd in this dialog box.
You will get an email with a license.dat file. Copy it into the ~/Microchip/license directory. Edit the License.dat file to replace the <put.hostname.here> string with… localhost.
Execute tool setup script#
Download the script:
#!/bin/bash
#===============================================================================
# Edit the following section with the location where the following tools are
# installed:
# - SoftConsole (SC_INSTALL_DIR)
# - Libero (LIBERO_INSTALL_DIR)
# - Licensing daemon for Libero (LICENSE_DAEMON_DIR)
#===============================================================================
export SC_INSTALL_DIR=/home/$USER/Microchip/SoftConsole-v2022.2-RISC-V-747
export LIBERO_INSTALL_DIR=/home/$USER/Microchip/Libero_SoC_v2023.2
export LICENSE_DAEMON_DIR=/home/$USER/Microchip/Linux_Licensing_Daemon
export LICENSE_FILE_DIR=/home/$USER/Microchip/license
#===============================================================================
# The following was tested on Ubuntu 20.04 with:
# - Libero 2023.2
# - SoftConsole 2022.2
#===============================================================================
#
# SoftConsole
#
export PATH=$PATH:$SC_INSTALL_DIR/riscv-unknown-elf-gcc/bin
export FPGENPROG=$LIBERO_INSTALL_DIR/Libero/bin64/fpgenprog
#
# Libero
#
export PATH=$PATH:$LIBERO_INSTALL_DIR/Libero/bin:$LIBERO_INSTALL_DIR/Libero/bin64
export PATH=$PATH:$LIBERO_INSTALL_DIR/Synplify/bin
export PATH=$PATH:$LIBERO_INSTALL_DIR/Model/modeltech/linuxacoem
export LOCALE=C
export LD_LIBRARY_PATH=/usr/lib/i386-linux-gnu:$LD_LIBRARY_PATH
#
# Libero License daemon
#
export LM_LICENSE_FILE=1702@localhost
export SNPSLMD_LICENSE_FILE=1702@localhost
$LICENSE_DAEMON_DIR/lmgrd -c $LICENSE_FILE_DIR/License.dat -l $LICENSE_FILE_DIR/license.log
Source the script:
. ./setup-microchip-tools.sh
Important
Do not forget the leading dot. It matters. You will need to run this every time you restart your machine.
You can then start Libero to open an existing Libero project.
libero
However you will more than likely want to use Libero to run a TCL script that will build a design for you.
libero SCRIPT:BUILD_A_DESIGN.tcl